Digital alcohol test with audible alert
Quick response and resume
Auto power off
Easy to use and can be carried conveniently
Sensor: advanced semiconductor oxide alcohol sensor
Range: 0.00%-0.19% BAC (0.0-1.9g/l or 0.00-0.95mg/l BRAC)
Accuracy: 0.01% BAC (0.1g/l).
Power Input: 2 X 1.5V "AAA" alkaline batteries (NOT Included)
Operating time: warm up: 10s, response: <5s
Auto power off 35 seconds approx.
How to use the alcohol tester: Warm up
1. Press the power button; the alcohol tester LCD will turn on with one beep sound.
2. The "warm up" symbol is displayed, and the 10 to 0
countdown is started that indicates the tester is in warm-up mode.
1 x Alcohol Tester
1 x English Manual
1 x Strap
It always has a large number of gas & impurity adsorbed on the surface of alcohol sensor. When used for the first time out of the package, or the tester not been used after a while,
it will need more time for cleaning and warm up the sensor.You should repress the power button and retry several times if possible.
How to Test:
1. The "Blow" symbol is displayed when warm-up ,
and the 10 to 0 countdown is started that indicates the tester is
in testing mode.
2. Near and blow into the breath inhaler for 3-5 seconds.
3. Read the test result from the alcohol tester LCD
4. The "Caution" symbol is displayed if the alcohol concentration
0.02% BAC(or 0.2g/l) to 0.05% BAC(or 0.5g/l).
0.05% BAC(or 0.5g/l) to 0.08% BAC(or 0.8g/l).
5. The "Danger" symbol is displayed with beeping audible alert if the alcohol concentration is the level:
over & equal 0.05% BAC(or 0.5g/l).
over & equal 0.08% BAC(or 0.8g/l)
Auto power off :
1. After the result displays for about 15 seconds, the "OFF"
Symbol will appear for 2-3 seconds, and the alcohol tester will be turned off.
2. If no blow into the breath inhaler at the test mode, the LCD will display "0.00" value.
To obtain a more accurate result, the manufacturer recommends you to check repeatedly 2 or 3 times.
After drinking, it is recommended to wait 20 minutes. It is because in 20 minutes approximately, alcohol would be absorbed into the blood from the digestive organs, and residual alcohol remaining in the mouth will take this long to dissipate.
For an accurate result, do not repeat testing within 3 minutes from the last test.
Do not smoke and eat for 20 minutes prior testing.
Do not use chemicals such as benzene, thinner or petrol.
Clean the tester before use.
Do not blow liquid into the breath pipe.
Do not use any excitant substances near the tester, such as painkillers, insecticides, alcohols.
Do not place the tester in the closed environment with contaminated air.
Modifying or tampering with the unit's internal components may cause a malfunction.
The unit is designed to be used as an aid to promote reasonable driving. It should not be used in anticipation of the use or operation of vehicles, machinery, or equipment.
The unit makes no references whatsoever to blood alcohol content or other such measures of intoxication promulgated by government, medical or other agencies or bodies.
The result of this alcohol gives BAC for reference only.
The manufacturer does not to take any legal responsibility.
This product hasn't received any reviews yet. Be the first to review this product!